| Pat-
If I could see what you have been using for igskip and ilength parameters
that would help troubleshooting, but here's some thoughts:
your source soundfile must be longer than ilength + igskip, be sure to take
igskip_os into account, this could put you over.
your igskip_os (*offset*) is .005 (sec), if igskip is 0 this might cause
problems ...?
if that doesn't work, ask again, post the full instrument and the ftable (not
necessarily the soundfile, but the ftable values) and I'll look more.
also, 64 voices may take a long time to compute (if it doesn't now, when you
get longer files or more instruments it will). I've found that using 15 or
20, or even 10, voices sounds about the same and runs a lot faster. Even if
you decide you want a lot of voices in the end, it can make tweaking the
instrument a lot easier/faster.
Good luck-
nate
Hi folks
been using Grain for a while and wanted to try to start to fool with
Granule for the pitch shift possibilities
but i keep getting an illegal combination between and ilength
asig granule 3000, 64, 1, 0, 0, 3, 0, ?, .005, ?, 0.02, 50, 0.04, 50,
30, .31
can someone give me an appropriate settings or an idea of the
relationship?
thanks >>
Hi folks
been using Grain for a while and wanted to try to start to fool with
Granule for the pitch shift possibilities
but i keep getting an illegal combination between iskip and ilength
asig granule 3000, 64, 1, 0, 0, 3, 0, ?, .005, ?, 0.02, 50, 0.04, 50,
30, .31
can someone give me an appropriate settings or an idea of the
relationship?
thanks
Pat
|