i will have to re-install it and check. Is there a way to safely run Csound5 and Csound6 on the same machine?
I was getting a problem with csound6 and csound~.mxo with some bundle error so i got everything back up nd running except for as i said hidrae and vocalese for M4L patches. Improsculpt is working on 10.8 with csound 5.13
I will try to install the csound6/StevenYis Csound~ and see what shakes on another machine, but as it is i am reticient to change again

pp

Patrick Pagano B.S, M.F.A
Audio and Projection Design Faculty
Digital Worlds Institute
University of Florida, USA
(352)294-2020

________________________________________
From: obrandts@gmail.com [obrandts@gmail.com] on behalf of Oeyvind Brandtsegg [oyvind.brandtsegg@ntnu.no]
Sent: Sunday, November 17, 2013 3:28 AM
To: Csound mailing list address
Cc: Richard Boulanger
Subject: Re: [Csnd]

It also seems a reasonable approach would be to make ImproSculpt run
under Csound6,
could you give some more details about what problems you have with
Improsculpt and FLTK under Cs6?
(I assume it is the ImproSculpt 'classic' version then?)
best
Oeyvind

2013/11/16 Pagano, Patrick <pat@digitalworlds.ufl.edu>:
> i tracked down the error of XquadScanned to alwayson "reverbx" i commented
> it out and the .amxd plays fine
> Is reverbx new to csound6 by chance?
>
> pp
>
> Patrick Pagano B.S, M.F.A
> Audio and Projection Design Faculty
> Digital Worlds Institute
> University of Florida, USA
> (352)294-2020
> ________________________________
> From: Pagano, Patrick [pat@digitalworlds.ufl.edu]
> Sent: Friday, November 15, 2013 9:26 PM
>
> To: csound@lists.bath.ac.uk
> Cc: Richard Boulanger
> Subject: RE: [Csnd]
>
> I also found that that XQuadScanned also gives me an error. Out of all the
> Csound4 live patches Hidrae and XQUadScanned do not compile inside of
> Ableton live, XQuad gave me an issue even in Csound6 with Steven Yis Csound~
> object wher i would have to turn off Reverb for it to work and choose
> another scans trajectory to get ot to make sound. Is there any way to
> contact George Zucco to see if he is willing to modify Hidrae and
> XQuadScanned so they work with Csound5? then i would actially have a full
> suite of csound Tools working inside of Ableton Live which is VERY appealing
> and will help out quite a bit. i have attached it here hoping for some
> assitance if anyone else wants to give them a try. I had csound6 but had to
> switch to csound5 for FLTK reasons related to Oeyvind's Improsculpt
>
> help if you can
>
> thanks!
>
> pp
>
> Patrick Pagano B.S, M.F.A
> Audio and Projection Design Faculty
> Digital Worlds Institute
> University of Florida, USA
> (352)294-2020
> ________________________________
> From: Pagano, Patrick [pat@digitalworlds.ufl.edu]
> Sent: Friday, November 15, 2013 8:49 PM
> To: csound@lists.bath.ac.uk
> Cc: Richard Boulanger
> Subject: [Csnd]
>
> Hello
>
> I have been trying to work with Oeyvind Brandestag's Improsculpt on my
> laptop which predicated me switching to csound5.13 for what i was trying to
> do. Unfortunately it has adversely effected my CsoundForlive .amxd files.
> MOST of them open no problem except for George Zuccos' fabulous Hidrae max
> for live patch. It seems to be the only file that will not run when i
> switched form Csound6.01/Max6.1 and csound~ by steven  Yi to csound
> 5.13/csound~v1.10 and max6.1 all on mac. i get an error that it will not
> compile
> csoundCompile() failed
>
> does anyone have it working with csound5 and ableton?
> I would really like to continue to use this instr
>
> thanks!
>
> Patrick
>
>
>
> Patrick Pagano B.S, M.F.A
> Audio and Projection Design Faculty
> Digital Worlds Institute
> University of Florida, USA
> (352)294-2020



--

Oeyvind Brandtsegg
Professor of Music Technology
NTNU
7491 Trondheim
Norway
Cell: +47 92 203 205

http://flyndresang.no/
http://www.partikkelaudio.com/
http://soundcloud.com/brandtsegg
http://soundcloud.com/t-emp


Send bugs reports to the Sourceforge bug trackers
csound6:
            https://sourceforge.net/p/csound/tickets/
csound5:
            https://sourceforge.net/p/csound/bugs/
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"




Send bugs reports to the Sourceforge bug trackers
csound6:
            https://sourceforge.net/p/csound/tickets/
csound5:
            https://sourceforge.net/p/csound/bugs/
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"

You can install both on the same machine as long as the environments are different.

That is, nothing related to Csound 6 should show up in Csound 5's PATH environment variable, and vice versa.

You can set up Windows batch files to open a command shell with the environment variables that you require.

If you're not sure what I'm talking about, I'll explain in more detail here.

Regards,

Mike

-----------------------------------------------------

Michael Gogins
Irreducible Productions
http://michaelgogins.tumblr.com
Michael dot Gogins at gmail dot com

On Sun, Nov 17, 2013 at 3:10 PM, Pagano, Patrick <pat@digitalworlds.ufl.edu> wrote:

i will have to re-install it and check. Is there a way to safely run Csound5 and Csound6 on the same machine?
I was getting a problem with csound6 and csound~.mxo with some bundle error so i got everything back up nd running except for as i said hidrae and vocalese for M4L patches. Improsculpt is working on 10.8 with csound 5.13
I will try to install the csound6/StevenYis Csound~ and see what shakes on another machine, but as it is i am reticient to change again

pp

Patrick Pagano B.S, M.F.A
Audio and Projection Design Faculty
Digital Worlds Institute
University of Florida, USA
(352)294-2020

________________________________________
From: obrandts@gmail.com [obrandts@gmail.com] on behalf of Oeyvind Brandtsegg [oyvind.brandtsegg@ntnu.no]
Sent: Sunday, November 17, 2013 3:28 AM
To: Csound mailing list address
Cc: Richard Boulanger
Subject: Re: [Csnd]

It also seems a reasonable approach would be to make ImproSculpt run
under Csound6,
could you give some more details about what problems you have with
Improsculpt and FLTK under Cs6?
(I assume it is the ImproSculpt 'classic' version then?)
best
Oeyvind

2013/11/16 Pagano, Patrick <pat@digitalworlds.ufl.edu>:
> i tracked down the error of XquadScanned to alwayson "reverbx" i commented
> it out and the .amxd plays fine
> Is reverbx new to csound6 by chance?
>
> pp
>
> Patrick Pagano B.S, M.F.A
> Audio and Projection Design Faculty
> Digital Worlds Institute
> University of Florida, USA
> (352)294-2020
> ________________________________
> From: Pagano, Patrick [pat@digitalworlds.ufl.edu]
> Sent: Friday, November 15, 2013 9:26 PM
>
> To: csound@lists.bath.ac.uk
> Cc: Richard Boulanger
> Subject: RE: [Csnd]
>
> I also found that that XQuadScanned also gives me an error. Out of all the
> Csound4 live patches Hidrae and XQUadScanned do not compile inside of
> Ableton live, XQuad gave me an issue even in Csound6 with Steven Yis Csound~
> object wher i would have to turn off Reverb for it to work and choose
> another scans trajectory to get ot to make sound. Is there any way to
> contact George Zucco to see if he is willing to modify Hidrae and
> XQuadScanned so they work with Csound5? then i would actially have a full
> suite of csound Tools working inside of Ableton Live which is VERY appealing
> and will help out quite a bit. i have attached it here hoping for some
> assitance if anyone else wants to give them a try. I had csound6 but had to
> switch to csound5 for FLTK reasons related to Oeyvind's Improsculpt
>
> help if you can
>
> thanks!
>
> pp
>
> Patrick Pagano B.S, M.F.A
> Audio and Projection Design Faculty
> Digital Worlds Institute
> University of Florida, USA
> (352)294-2020
> ________________________________
> From: Pagano, Patrick [pat@digitalworlds.ufl.edu]
> Sent: Friday, November 15, 2013 8:49 PM
> To: csound@lists.bath.ac.uk
> Cc: Richard Boulanger
> Subject: [Csnd]
>
> Hello
>
> I have been trying to work with Oeyvind Brandestag's Improsculpt on my
> laptop which predicated me switching to csound5.13 for what i was trying to
> do. Unfortunately it has adversely effected my CsoundForlive .amxd files.
> MOST of them open no problem except for George Zuccos' fabulous Hidrae max
> for live patch. It seems to be the only file that will not run when i
> switched form Csound6.01/Max6.1 and csound~ by steven  Yi to csound
> 5.13/csound~v1.10 and max6.1 all on mac. i get an error that it will not
> compile
> csoundCompile() failed
>
> does anyone have it working with csound5 and ableton?
> I would really like to continue to use this instr
>
> thanks!
>
> Patrick
>
>
>
> Patrick Pagano B.S, M.F.A
> Audio and Projection Design Faculty
> Digital Worlds Institute
> University of Florida, USA
> (352)294-2020



--

Oeyvind Brandtsegg
Professor of Music Technology
NTNU
7491 Trondheim
Norway
Cell: +47 92 203 205

http://flyndresang.no/
http://www.partikkelaudio.com/
http://soundcloud.com/brandtsegg
http://soundcloud.com/t-emp


Send bugs reports to the Sourceforge bug trackers
csound6:
            https://sourceforge.net/p/csound/tickets/
csound5:
            https://sourceforge.net/p/csound/bugs/
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"




Send bugs reports to the Sourceforge bug trackers
csound6:
            https://sourceforge.net/p/csound/tickets/
csound5:
            https://sourceforge.net/p/csound/bugs/
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"