Csound Csound-dev Csound-tekno Search About

Re: [Csnd] Csound6 and Spatialization

Date2013-09-18 08:21
Fromjpff@cs.bath.ac.uk
SubjectRe: [Csnd] Csound6 and Spatialization
> it would seem very advantageous to extend this capability to any opcode
> which inputs or outputs an unlimited number of a-rate variables.  for
> instance, diskin2, vbap, fin, fout, pconvolve, etc.

So far the following have been made array-aware (at least in part):

in, out, fin, fout, vbap, vbapg, vbapmove, vbapgmove, bformenc1, bformdec1

considering/to come?: pconvolve, soundin, loscilx, platerev

The manual is updated for:
in, out, fin, fout, vbap, vbapg, vbapmove, bformenc1, bformdec1

==John ffitch



Date2013-09-18 08:27
FromVictor Lazzarini
SubjectRe: [Csnd] Csound6 and Spatialization
nice!
On 18 Sep 2013, at 08:21, jpff@cs.bath.ac.uk wrote:

>> it would seem very advantageous to extend this capability to any opcode
>> which inputs or outputs an unlimited number of a-rate variables.  for
>> instance, diskin2, vbap, fin, fout, pconvolve, etc.
> 
> So far the following have been made array-aware (at least in part):
> 
> in, out, fin, fout, vbap, vbapg, vbapmove, vbapgmove, bformenc1, bformdec1
> 
> considering/to come?: pconvolve, soundin, loscilx, platerev
> 
> The manual is updated for:
> in, out, fin, fout, vbap, vbapg, vbapmove, bformenc1, bformdec1
> 
> ==John ffitch
> 
> 
> 
> 
> Send bugs reports to the Sourceforge bug trackers
> csound6:
>            https://sourceforge.net/p/csound/tickets/
> csound5:
>            https://sourceforge.net/p/csound/bugs/
> Discussions of bugs and features can be posted here
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"
> 
> 

Dr Victor Lazzarini
Senior Lecturer
Dept. of Music
NUI Maynooth Ireland
tel.: +353 1 708 3545
Victor dot Lazzarini AT nuim dot ie





Date2013-09-18 08:38
Fromjoachim heintz
SubjectRe: [Csnd] Csound6 and Spatialization
this sounds great, and i was curious to have a look in the manual 
descriptions. unfortunately, i got a warning and some errors. can you 
have a look? the message is below.
thanks -
	joachim

warning: failed to load external entity "opcodes/vbapgmove.xml"
opcodes/top.xml:1082: parser error : Failure to process entity 
opcodesvbapgmove
   &opcodesvbapgmove;
                     ^
opcodes/top.xml:1082: parser error : Entity 'opcodesvbapgmove' not defined
   &opcodesvbapgmove;
                     ^
opcodes/top.xml:1216: parser error : chunk is not well balanced

^
manual.xml:1839: parser error : Failure to process entity opcodes
     &opcodes;
              ^
manual.xml:1839: parser error : Entity 'opcodes' not defined
     &opcodes;
              ^
unable to parse manual.xml
make: *** [html] Fehler 6



Am 18.09.2013 09:21, schrieb jpff@cs.bath.ac.uk:
>> it would seem very advantageous to extend this capability to any opcode
>> which inputs or outputs an unlimited number of a-rate variables.  for
>> instance, diskin2, vbap, fin, fout, pconvolve, etc.
>
> So far the following have been made array-aware (at least in part):
>
> in, out, fin, fout, vbap, vbapg, vbapmove, vbapgmove, bformenc1, bformdec1
>
> considering/to come?: pconvolve, soundin, loscilx, platerev
>
> The manual is updated for:
> in, out, fin, fout, vbap, vbapg, vbapmove, bformenc1, bformdec1
>
> ==John ffitch
>
>
>
>
> Send bugs reports to the Sourceforge bug trackers
> csound6:
>              https://sourceforge.net/p/csound/tickets/
> csound5:
>              https://sourceforge.net/p/csound/bugs/
> Discussions of bugs and features can be posted here
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"
>
>
>

Date2013-09-18 09:25
Fromjpff@cs.bath.ac.uk
SubjectRe: [Csnd] Csound6 and Spatialization
looks like I failed yo  add a file -- will look

 this sounds great, and i was curious to have a look in the manual
> descriptions. unfortunately, i got a warning and some errors. can you
> have a look? the message is below.
> thanks -
> 	joachim
>
> warning: failed to load external entity "opcodes/vbapgmove.xml"
> opcodes/top.xml:1082: parser error : Failure to process entity
> opcodesvbapgmove
>    &opcodesvbapgmove;
>                      ^
> opcodes/top.xml:1082: parser error : Entity 'opcodesvbapgmove' not defined
>    &opcodesvbapgmove;
>                      ^
> opcodes/top.xml:1216: parser error : chunk is not well balanced
>
> ^
> manual.xml:1839: parser error : Failure to process entity opcodes
>      &opcodes;
>               ^
> manual.xml:1839: parser error : Entity 'opcodes' not defined
>      &opcodes;
>               ^
> unable to parse manual.xml
> make: *** [html] Fehler 6
>
>
>
> Am 18.09.2013 09:21, schrieb jpff@cs.bath.ac.uk:
>>> it would seem very advantageous to extend this capability to any opcode
>>> which inputs or outputs an unlimited number of a-rate variables.  for
>>> instance, diskin2, vbap, fin, fout, pconvolve, etc.
>>
>> So far the following have been made array-aware (at least in part):
>>
>> in, out, fin, fout, vbap, vbapg, vbapmove, vbapgmove, bformenc1,
>> bformdec1
>>
>> considering/to come?: pconvolve, soundin, loscilx, platerev
>>
>> The manual is updated for:
>> in, out, fin, fout, vbap, vbapg, vbapmove, bformenc1, bformdec1
>>
>> ==John ffitch
>>
>>
>>
>>
>> Send bugs reports to the Sourceforge bug trackers
>> csound6:
>>              https://sourceforge.net/p/csound/tickets/
>> csound5:
>>              https://sourceforge.net/p/csound/bugs/
>> Discussions of bugs and features can be posted here
>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>> csound"
>>
>>
>>
>
>
> Send bugs reports to the Sourceforge bug trackers
> csound6:
>             https://sourceforge.net/p/csound/tickets/
> csound5:
>             https://sourceforge.net/p/csound/bugs/
> Discussions of bugs and features can be posted here
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
> csound"
>
>
>
>
>



Date2013-09-18 09:27
Fromjpff@cs.bath.ac.uk
SubjectRe: [Csnd] Csound6 and Spatialization
File checked in -- apologies

==John
  (will be back tonight)


> this sounds great, and i was curious to have a look in the manual
> descriptions. unfortunately, i got a warning and some errors. can you
> have a look? the message is below.
> thanks -
> 	joachim
>
> warning: failed to load external entity "opcodes/vbapgmove.xml"
> opcodes/top.xml:1082: parser error : Failure to process entity
> opcodesvbapgmove
>    &opcodesvbapgmove;
>                      ^
> opcodes/top.xml:1082: parser error : Entity 'opcodesvbapgmove' not defined
>    &opcodesvbapgmove;
>                      ^
> opcodes/top.xml:1216: parser error : chunk is not well balanced
>
> ^
> manual.xml:1839: parser error : Failure to process entity opcodes
>      &opcodes;
>               ^
> manual.xml:1839: parser error : Entity 'opcodes' not defined
>      &opcodes;
>               ^
> unable to parse manual.xml
> make: *** [html] Fehler 6
>
>
>
> Am 18.09.2013 09:21, schrieb jpff@cs.bath.ac.uk:
>>> it would seem very advantageous to extend this capability to any opcode
>>> which inputs or outputs an unlimited number of a-rate variables.  for
>>> instance, diskin2, vbap, fin, fout, pconvolve, etc.
>>
>> So far the following have been made array-aware (at least in part):
>>
>> in, out, fin, fout, vbap, vbapg, vbapmove, vbapgmove, bformenc1,
>> bformdec1
>>
>> considering/to come?: pconvolve, soundin, loscilx, platerev
>>
>> The manual is updated for:
>> in, out, fin, fout, vbap, vbapg, vbapmove, bformenc1, bformdec1
>>
>> ==John ffitch
>>
>>
>>
>>
>> Send bugs reports to the Sourceforge bug trackers
>> csound6:
>>              https://sourceforge.net/p/csound/tickets/
>> csound5:
>>              https://sourceforge.net/p/csound/bugs/
>> Discussions of bugs and features can be posted here
>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>> csound"
>>
>>
>>
>
>
> Send bugs reports to the Sourceforge bug trackers
> csound6:
>             https://sourceforge.net/p/csound/tickets/
> csound5:
>             https://sourceforge.net/p/csound/bugs/
> Discussions of bugs and features can be posted here
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
> csound"
>
>
>
>
>



Date2013-09-18 11:44
Fromjoachim heintz
SubjectRe: [Csnd] Csound6 and Spatialization
thanks, yes, i could build the manual now.

i had a quick look at the bformenc1 page. you wrote:
aarray[] bformenc1 asig, kalpha, kbeta

should it not be instead:
aarray bformenc1 asig, kalpha, kbeta

so, *without* the square brackets? i assume that the array has to be 
initialized with a certain size before?

in the explanation you write without brackets:
aarray -- output array to hold cells of the B format.

so aarray[] might be a typo -- unless i do not yet understand the usage 
of brackets vs non-brackets in array variables correctly.

best -

	joachim



Am 18.09.2013 10:27, schrieb jpff@cs.bath.ac.uk:
> File checked in -- apologies
>
> ==John
>    (will be back tonight)
>
>
>> this sounds great, and i was curious to have a look in the manual
>> descriptions. unfortunately, i got a warning and some errors. can you
>> have a look? the message is below.
>> thanks -
>> 	joachim
>>
>> warning: failed to load external entity "opcodes/vbapgmove.xml"
>> opcodes/top.xml:1082: parser error : Failure to process entity
>> opcodesvbapgmove
>>     &opcodesvbapgmove;
>>                       ^
>> opcodes/top.xml:1082: parser error : Entity 'opcodesvbapgmove' not defined
>>     &opcodesvbapgmove;
>>                       ^
>> opcodes/top.xml:1216: parser error : chunk is not well balanced
>>
>> ^
>> manual.xml:1839: parser error : Failure to process entity opcodes
>>       &opcodes;
>>                ^
>> manual.xml:1839: parser error : Entity 'opcodes' not defined
>>       &opcodes;
>>                ^
>> unable to parse manual.xml
>> make: *** [html] Fehler 6
>>
>>
>>
>> Am 18.09.2013 09:21, schrieb jpff@cs.bath.ac.uk:
>>>> it would seem very advantageous to extend this capability to any opcode
>>>> which inputs or outputs an unlimited number of a-rate variables.  for
>>>> instance, diskin2, vbap, fin, fout, pconvolve, etc.
>>>
>>> So far the following have been made array-aware (at least in part):
>>>
>>> in, out, fin, fout, vbap, vbapg, vbapmove, vbapgmove, bformenc1,
>>> bformdec1
>>>
>>> considering/to come?: pconvolve, soundin, loscilx, platerev
>>>
>>> The manual is updated for:
>>> in, out, fin, fout, vbap, vbapg, vbapmove, bformenc1, bformdec1
>>>
>>> ==John ffitch
>>>
>>>
>>>
>>>
>>> Send bugs reports to the Sourceforge bug trackers
>>> csound6:
>>>               https://sourceforge.net/p/csound/tickets/
>>> csound5:
>>>               https://sourceforge.net/p/csound/bugs/
>>> Discussions of bugs and features can be posted here
>>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>>> csound"
>>>
>>>
>>>
>>
>>
>> Send bugs reports to the Sourceforge bug trackers
>> csound6:
>>              https://sourceforge.net/p/csound/tickets/
>> csound5:
>>              https://sourceforge.net/p/csound/bugs/
>> Discussions of bugs and features can be posted here
>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>> csound"
>>
>>
>>
>>
>>
>
>
>
>
> Send bugs reports to the Sourceforge bug trackers
> csound6:
>              https://sourceforge.net/p/csound/tickets/
> csound5:
>              https://sourceforge.net/p/csound/bugs/
> Discussions of bugs and features can be posted here
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"
>
>
>

Date2013-09-18 21:59
FromBen Hackbarth
SubjectRe: [Csnd] Csound6 and Spatialization
thanks john, this looks really cool.  will try soon!

--  ben


On Wed, Sep 18, 2013 at 6:44 AM, joachim heintz <jh@joachimheintz.de> wrote:
thanks, yes, i could build the manual now.

i had a quick look at the bformenc1 page. you wrote:
aarray[] bformenc1 asig, kalpha, kbeta

should it not be instead:
aarray bformenc1 asig, kalpha, kbeta

so, *without* the square brackets? i assume that the array has to be initialized with a certain size before?

in the explanation you write without brackets:
aarray -- output array to hold cells of the B format.

so aarray[] might be a typo -- unless i do not yet understand the usage of brackets vs non-brackets in array variables correctly.

best -

        joachim



Am 18.09.2013 10:27, schrieb jpff@cs.bath.ac.uk:

File checked in -- apologies

==John
   (will be back tonight)


this sounds great, and i was curious to have a look in the manual
descriptions. unfortunately, i got a warning and some errors. can you
have a look? the message is below.
thanks -
        joachim

warning: failed to load external entity "opcodes/vbapgmove.xml"
opcodes/top.xml:1082: parser error : Failure to process entity
opcodesvbapgmove
    &opcodesvbapgmove;
                      ^
opcodes/top.xml:1082: parser error : Entity 'opcodesvbapgmove' not defined
    &opcodesvbapgmove;
                      ^
opcodes/top.xml:1216: parser error : chunk is not well balanced

^
manual.xml:1839: parser error : Failure to process entity opcodes
      &opcodes;
               ^
manual.xml:1839: parser error : Entity 'opcodes' not defined
      &opcodes;
               ^
unable to parse manual.xml
make: *** [html] Fehler 6



Am 18.09.2013 09:21, schrieb jpff@cs.bath.ac.uk:
it would seem very advantageous to extend this capability to any opcode
which inputs or outputs an unlimited number of a-rate variables.  for
instance, diskin2, vbap, fin, fout, pconvolve, etc.

So far the following have been made array-aware (at least in part):

in, out, fin, fout, vbap, vbapg, vbapmove, vbapgmove, bformenc1,
bformdec1

considering/to come?: pconvolve, soundin, loscilx, platerev

The manual is updated for:
in, out, fin, fout, vbap, vbapg, vbapmove, bformenc1, bformdec1

==John ffitch




Send bugs reports to the Sourceforge bug trackers
csound6:
              https://sourceforge.net/p/csound/tickets/
csound5:
              https://sourceforge.net/p/csound/bugs/
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
csound"





Send bugs reports to the Sourceforge bug trackers
csound6:
             https://sourceforge.net/p/csound/tickets/
csound5:
             https://sourceforge.net/p/csound/bugs/
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
csound"









Send bugs reports to the Sourceforge bug trackers
csound6:
             https://sourceforge.net/p/csound/tickets/
csound5:
             https://sourceforge.net/p/csound/bugs/
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"





Send bugs reports to the Sourceforge bug trackers
csound6:
           https://sourceforge.net/p/csound/tickets/
csound5:
           https://sourceforge.net/p/csound/bugs/
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"