[Csnd] Re: Re: Re: Re: QuteCsound build errors on Windows

Date	2010-04-29 20:44
From	michael.gogins@gmail.com
Subject	[Csnd] Re: Re: Re: Re: QuteCsound build errors on Windows
	I did a fresh checkout and deleted all strc/moc_* and src/ui_* files, and I still have the problem below. Regards, Mike ----- Original Message ----- From: "Andres Cabrera" To: Sent: Thursday, April 29, 2010 2:32 PM Subject: [Csnd] Re: Re: Re: QuteCsound build errors on Windows Hi Michael, I think the build procedure should not have changed for Windows, but probably there are still some intermediate files causing trouble. Do you have trouble with a fresh chekout? Cheers, Andrés On Thu, Apr 29, 2010 at 7:19 PM, wrote: > Now I get the error below. > > The build instructions in SVN are no good. What are the complete working > build instructions for Windows with MinGW? > > Regards, > Mike > > g++ -c -g -Wall -frtti -fexceptions -mthreads -DUNICODE > -DQT_LARGEFILE_SUPPORT -DUSE_DOUBLE -DQT_THREAD_SUPPORT -DQT_XML_LIB -DQT_GU > I_LIB -DQT_CORE_LIB -DQT_NEEDS_QMAIN > -I"c:\utah\opt\Qt\2010.02.1\qt\include\QtCore" > -I"c:\utah\opt\Qt\2010.02.1\qt\include\QtGui" -I > "c:\utah\opt\Qt\2010.02.1\qt\include\QtXml" > -I"c:\utah\opt\Qt\2010.02.1\qt\include" > -I"..\..\home\mkg\csound-mingw-release\H" -I"..\ > ..\home\mkg\csound-mingw-release\interfaces" > -I"..\Mega-Nerd\libsndfile\include" > -I"c:\utah\opt\Qt\2009.03\qt\include\QtXml" -I"c:\u > tah\opt\Csound-5.11.1\include" -I"..\Mega-Nerd\libsndfile\include" > -I"c:\utah\opt\qutecsound\src" -I"c:\utah\opt\Qt\2010.02.1\qt\inc > lude\ActiveQt" -I"build\doubles\debug\moc" -I"build\doubles\debug\ui" > -I"c:\utah\opt\Qt\2010.02.1\qt\mkspecs\win32-g++" -o build\dou > bles\debug\obj\about.o src\about.cpp > mingw32-make[1]: * No rule to make target `src/ui_configdialog.h', > needed > by `build/doubles/debug/obj/configdialog.o'. Stop. > mingw32-make[1]: Leaving directory `D:/utah/opt/qutecsound' > mingw32-make: * [sub-qcs-win32-pro-all] Error 2 > ----- Original Message ----- From: "Andres Cabrera" > > To: > Sent: Thursday, April 29, 2010 11:52 AM > Subject: [Csnd] Re: QuteCsound build errors on Windows > > > Hi Michael, > > The build system has recently changed, so you may need to manually > remove all intermediate files (e.g. the ones starting with "moc_" and > "ui_" from the src directory. > > This should take care of it. > > Cheers, > Andrés > > On Thu, Apr 29, 2010 at 4:04 PM, wrote: >> >> What would cause this? (Qt 4.6.2 with Qt's own version of MinGW): >> >> g++ -c -g -Wall -frtti -fexceptions -mthreads -DUNICODE >> -DQT_LARGEFILE_SUPPORT -DUSE_DOUBLE -DQT_THREAD_SUPPORT -DQT_XML_LIB >> -DQT_GU >> I_LIB -DQT_CORE_LIB -DQT_NEEDS_QMAIN >> -I"c:\utah\opt\Qt\2010.02.1\qt\include\QtCore" >> -I"c:\utah\opt\Qt\2010.02.1\qt\include\QtGui" -I >> "c:\utah\opt\Qt\2010.02.1\qt\include\QtXml" >> -I"c:\utah\opt\Qt\2010.02.1\qt\include" >> -I"..\..\home\mkg\csound-mingw-release\H" -I"..\ >> ..\home\mkg\csound-mingw-release\interfaces" >> -I"..\Mega-Nerd\libsndfile\include" >> -I"c:\utah\opt\Qt\2009.03\qt\include\QtXml" -I"c:\u >> tah\opt\Csound-5.11.1\include" -I"..\Mega-Nerd\libsndfile\include" >> -I"c:\utah\opt\qutecsound\src" -I"c:\utah\opt\Qt\2010.02.1\qt\inc >> lude\ActiveQt" -I"build\doubles\debug\moc" -I"build\doubles\debug\ui" >> -I"c:\utah\opt\Qt\2010.02.1\qt\mkspecs\win32-g++" -o build\dou >> bles\debug\obj\configdialog.o src\configdialog.cpp >> src\configdialog.cpp: In constructor >> 'ConfigDialog::ConfigDialog(qutecsound, Options)': >> src\configdialog.cpp:72: error: 'toolbarCheckBox' was not declared in >> this >> scope >> src\configdialog.cpp:74: error: 'autoCompleteCheckBox' was not declared >> in >> this scope >> src\configdialog.cpp:82: error: 'oldFormatCheckBox' was not declared in >> this >> scope >> src\configdialog.cpp:83: error: 'openPropertiesCheckBox' was not declared >> in >> this scope >> src\configdialog.cpp:92: error: 'keyRepeatCheckBox' was not declared in >> this >> scope >> src\configdialog.cpp:93: error: 'debugLiveEventsCheckBox' was not >> declared >> in this scope >> src\configdialog.cpp:94: error: 'consoleBufferComboBox' was not declared >> in >> this scope >> src\configdialog.cpp:131: error: 'simultaneousCheckBox' was not declared >> in >> this scope >> src\configdialog.cpp:154: error: 'favoriteLineEdit' was not declared in >> this >> scope >> src\configdialog.cpp:155: error: 'pythonDirLineEdit' was not declared in >> this scope >> src\configdialog.cpp:156: error: 'logFileLineEdit' was not declared in >> this >> scope >> src\configdialog.cpp:175: error: 'favoriteToolButton' was not declared in >> this scope >> src\configdialog.cpp:182: error: 'pythonDirToolButton' was not declared >> in >> this scope >> src\configdialog.cpp:183: error: 'logFileToolButton' was not declared in >> this scope >> src\configdialog.cpp: In member function 'virtual void >> ConfigDialog::accept()': >> src\configdialog.cpp:233: error: 'toolbarCheckBox' was not declared in >> this >> scope >> src\configdialog.cpp:235: error: 'autoCompleteCheckBox' was not declared >> in >> this scope >> src\configdialog.cpp:242: error: 'oldFormatCheckBox' was not declared in >> this scope >> src\configdialog.cpp:243: error: 'openPropertiesCheckBox' was not >> declared >> in this scope >> src\configdialog.cpp:247: error: 'keyRepeatCheckBox' was not declared in >> this scope >> src\configdialog.cpp:248: error: 'debugLiveEventsCheckBox' was not >> declared >> in this scope >> src\configdialog.cpp:249: error: 'consoleBufferComboBox' was not declared >> in >> this scope >> src\configdialog.cpp:278: error: 'simultaneousCheckBox' was not declared >> in >> this scope >> src\configdialog.cpp:295: error: 'favoriteLineEdit' was not declared in >> this >> scope >> src\configdialog.cpp:296: error: 'pythonDirLineEdit' was not declared in >> this scope >> src\configdialog.cpp:297: error: 'logFileLineEdit' was not declared in >> this >> scope >> src\configdialog.cpp: In member function 'void >> ConfigDialog::browseFavorite()': >> src\configdialog.cpp:373: error: 'favoriteLineEdit' was not declared in >> this >> scope >> src\configdialog.cpp: In member function 'void >> ConfigDialog::browsePythonDir()': >> src\configdialog.cpp:415: error: 'pythonDirLineEdit' was not declared in >> this scope >> src\configdialog.cpp: In member function 'void >> ConfigDialog::browseLogFile()': >> src\configdialog.cpp:421: error: 'logFileLineEdit' was not declared in >> this >> scope >> mingw32-make[1]: * [build/doubles/debug/obj/configdialog.o] Error 1 >> mingw32-make[1]: Leaving directory `D:/utah/opt/qutecsound' >> mingw32-make: * [sub-qcs-win32-pro-all] Error 2 >> >> >> Send bugs reports to the Sourceforge bug tracker >> https://sourceforge.net/tracker/?group_id=81968&atid=564599 >> Discussions of bugs and features can be posted here >> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe >> csound" >> >> > > > > -- > > > Andrés > > > Send bugs reports to the Sourceforge bug tracker > https://sourceforge.net/tracker/?group_id=81968&atid=564599 > Discussions of bugs and features can be posted here > To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe > csound" > > > > > Send bugs reports to the Sourceforge bug tracker > https://sourceforge.net/tracker/?group_id=81968&atid=564599 > Discussions of bugs and features can be posted here > To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe > csound" > >

Date	2010-04-30 00:05
From	andy fillebrown
Subject	[Csnd] Re: Re: Re: Re: Re: QuteCsound build errors on Windows
	Hi Michael Sorry about not updating the build instructions yet. Try deleting the Makefiles and running qmake again. The error you're getting indicates mingw32-make is reading a Makefile from the old build system. --- Here's what I do: First, I run qtenv.bat ... C:\Qt\2010.02.01\bin\qtenv.bat Then, for the floats build of QuteCsound ... del Makefile* qmake qcs.pro CONFIG+=release mingw32-make . ... and for the doubles build ... del Makefile* qmake qcs,pro CONFIG+=release CONFIG+=build64 mingw32-make Additionally, there are 4 directory variables that can be added to the qmake call for explicitly specifying the location of Csound and libsndfile files ... CSOUND_INCLUDE_DIR=path\to\csound\headers CSOUND_LIBRARY_DIR=path\to\csound\binaries LIBSNDFILE_INCLUDE_DIR=path\to\libsndfile\headers LIBSNDFILE_LIBRARY_DIR=path\to\libsndfile\binaries If it still won't build, please send me the full output from the mingw32-make call along with the generated Makefiles, and I'll see if I can figure out what I did wrong. Cheers, ~ andy.f On Thu, Apr 29, 2010 at 3:44 PM, wrote: > I did a fresh checkout and deleted all strc/moc_* and src/ui_* files, and I > still have the problem below. > > Regards, > Mike > > ----- Original Message ----- From: "Andres Cabrera" > To: > Sent: Thursday, April 29, 2010 2:32 PM > Subject: [Csnd] Re: Re: Re: QuteCsound build errors on Windows > > > Hi Michael, > > I think the build procedure should not have changed for Windows, but > probably there are still some intermediate files causing trouble. Do > you have trouble with a fresh chekout? > > Cheers, > Andrés > > On Thu, Apr 29, 2010 at 7:19 PM, wrote: >> >> Now I get the error below. >> >> The build instructions in SVN are no good. What are the complete working >> build instructions for Windows with MinGW? >> >> Regards, >> Mike >> >> g++ -c -g -Wall -frtti -fexceptions -mthreads -DUNICODE >> -DQT_LARGEFILE_SUPPORT -DUSE_DOUBLE -DQT_THREAD_SUPPORT -DQT_XML_LIB >> -DQT_GU >> I_LIB -DQT_CORE_LIB -DQT_NEEDS_QMAIN >> -I"c:\utah\opt\Qt\2010.02.1\qt\include\QtCore" >> -I"c:\utah\opt\Qt\2010.02.1\qt\include\QtGui" -I >> "c:\utah\opt\Qt\2010.02.1\qt\include\QtXml" >> -I"c:\utah\opt\Qt\2010.02.1\qt\include" >> -I"..\..\home\mkg\csound-mingw-release\H" -I"..\ >> ..\home\mkg\csound-mingw-release\interfaces" >> -I"..\Mega-Nerd\libsndfile\include" >> -I"c:\utah\opt\Qt\2009.03\qt\include\QtXml" -I"c:\u >> tah\opt\Csound-5.11.1\include" -I"..\Mega-Nerd\libsndfile\include" >> -I"c:\utah\opt\qutecsound\src" -I"c:\utah\opt\Qt\2010.02.1\qt\inc >> lude\ActiveQt" -I"build\doubles\debug\moc" -I"build\doubles\debug\ui" >> -I"c:\utah\opt\Qt\2010.02.1\qt\mkspecs\win32-g++" -o build\dou >> bles\debug\obj\about.o src\about.cpp >> mingw32-make[1]: * No rule to make target `src/ui_configdialog.h', >> needed >> by `build/doubles/debug/obj/configdialog.o'. Stop. >> mingw32-make[1]: Leaving directory `D:/utah/opt/qutecsound' >> mingw32-make: * [sub-qcs-win32-pro-all] Error 2 >> ----- Original Message ----- From: "Andres Cabrera" >> >> To: >> Sent: Thursday, April 29, 2010 11:52 AM >> Subject: [Csnd] Re: QuteCsound build errors on Windows >> >> >> Hi Michael, >> >> The build system has recently changed, so you may need to manually >> remove all intermediate files (e.g. the ones starting with "moc_" and >> "ui_" from the src directory. >> >> This should take care of it. >> >> Cheers, >> Andrés >> >> On Thu, Apr 29, 2010 at 4:04 PM, wrote: >>> >>> What would cause this? (Qt 4.6.2 with Qt's own version of MinGW): >>> >>> g++ -c -g -Wall -frtti -fexceptions -mthreads -DUNICODE >>> -DQT_LARGEFILE_SUPPORT -DUSE_DOUBLE -DQT_THREAD_SUPPORT -DQT_XML_LIB >>> -DQT_GU >>> I_LIB -DQT_CORE_LIB -DQT_NEEDS_QMAIN >>> -I"c:\utah\opt\Qt\2010.02.1\qt\include\QtCore" >>> -I"c:\utah\opt\Qt\2010.02.1\qt\include\QtGui" -I >>> "c:\utah\opt\Qt\2010.02.1\qt\include\QtXml" >>> -I"c:\utah\opt\Qt\2010.02.1\qt\include" >>> -I"..\..\home\mkg\csound-mingw-release\H" -I"..\ >>> ..\home\mkg\csound-mingw-release\interfaces" >>> -I"..\Mega-Nerd\libsndfile\include" >>> -I"c:\utah\opt\Qt\2009.03\qt\include\QtXml" -I"c:\u >>> tah\opt\Csound-5.11.1\include" -I"..\Mega-Nerd\libsndfile\include" >>> -I"c:\utah\opt\qutecsound\src" -I"c:\utah\opt\Qt\2010.02.1\qt\inc >>> lude\ActiveQt" -I"build\doubles\debug\moc" -I"build\doubles\debug\ui" >>> -I"c:\utah\opt\Qt\2010.02.1\qt\mkspecs\win32-g++" -o build\dou >>> bles\debug\obj\configdialog.o src\configdialog.cpp >>> src\configdialog.cpp: In constructor >>> 'ConfigDialog::ConfigDialog(qutecsound, Options)': >>> src\configdialog.cpp:72: error: 'toolbarCheckBox' was not declared in >>> this >>> scope >>> src\configdialog.cpp:74: error: 'autoCompleteCheckBox' was not declared >>> in >>> this scope >>> src\configdialog.cpp:82: error: 'oldFormatCheckBox' was not declared in >>> this >>> scope >>> src\configdialog.cpp:83: error: 'openPropertiesCheckBox' was not declared >>> in >>> this scope >>> src\configdialog.cpp:92: error: 'keyRepeatCheckBox' was not declared in >>> this >>> scope >>> src\configdialog.cpp:93: error: 'debugLiveEventsCheckBox' was not >>> declared >>> in this scope >>> src\configdialog.cpp:94: error: 'consoleBufferComboBox' was not declared >>> in >>> this scope >>> src\configdialog.cpp:131: error: 'simultaneousCheckBox' was not declared >>> in >>> this scope >>> src\configdialog.cpp:154: error: 'favoriteLineEdit' was not declared in >>> this >>> scope >>> src\configdialog.cpp:155: error: 'pythonDirLineEdit' was not declared in >>> this scope >>> src\configdialog.cpp:156: error: 'logFileLineEdit' was not declared in >>> this >>> scope >>> src\configdialog.cpp:175: error: 'favoriteToolButton' was not declared in >>> this scope >>> src\configdialog.cpp:182: error: 'pythonDirToolButton' was not declared >>> in >>> this scope >>> src\configdialog.cpp:183: error: 'logFileToolButton' was not declared in >>> this scope >>> src\configdialog.cpp: In member function 'virtual void >>> ConfigDialog::accept()': >>> src\configdialog.cpp:233: error: 'toolbarCheckBox' was not declared in >>> this >>> scope >>> src\configdialog.cpp:235: error: 'autoCompleteCheckBox' was not declared >>> in >>> this scope >>> src\configdialog.cpp:242: error: 'oldFormatCheckBox' was not declared in >>> this scope >>> src\configdialog.cpp:243: error: 'openPropertiesCheckBox' was not >>> declared >>> in this scope >>> src\configdialog.cpp:247: error: 'keyRepeatCheckBox' was not declared in >>> this scope >>> src\configdialog.cpp:248: error: 'debugLiveEventsCheckBox' was not >>> declared >>> in this scope >>> src\configdialog.cpp:249: error: 'consoleBufferComboBox' was not declared >>> in >>> this scope >>> src\configdialog.cpp:278: error: 'simultaneousCheckBox' was not declared >>> in >>> this scope >>> src\configdialog.cpp:295: error: 'favoriteLineEdit' was not declared in >>> this >>> scope >>> src\configdialog.cpp:296: error: 'pythonDirLineEdit' was not declared in >>> this scope >>> src\configdialog.cpp:297: error: 'logFileLineEdit' was not declared in >>> this >>> scope >>> src\configdialog.cpp: In member function 'void >>> ConfigDialog::browseFavorite()': >>> src\configdialog.cpp:373: error: 'favoriteLineEdit' was not declared in >>> this >>> scope >>> src\configdialog.cpp: In member function 'void >>> ConfigDialog::browsePythonDir()': >>> src\configdialog.cpp:415: error: 'pythonDirLineEdit' was not declared in >>> this scope >>> src\configdialog.cpp: In member function 'void >>> ConfigDialog::browseLogFile()': >>> src\configdialog.cpp:421: error: 'logFileLineEdit' was not declared in >>> this >>> scope >>> mingw32-make[1]: * [build/doubles/debug/obj/configdialog.o] Error 1 >>> mingw32-make[1]: Leaving directory `D:/utah/opt/qutecsound' >>> mingw32-make: * [sub-qcs-win32-pro-all] Error 2 >>> >>> >>> Send bugs reports to the Sourceforge bug tracker >>> https://sourceforge.net/tracker/?group_id=81968&atid=564599 >>> Discussions of bugs and features can be posted here >>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe >>> csound" >>> >>> >> >> >> >> -- >> >> >> Andrés >> >> >> Send bugs reports to the Sourceforge bug tracker >> https://sourceforge.net/tracker/?group_id=81968&atid=564599 >> Discussions of bugs and features can be posted here >> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe >> csound" >> >> >> >> >> Send bugs reports to the Sourceforge bug tracker >> https://sourceforge.net/tracker/?group_id=81968&atid=564599 >> Discussions of bugs and features can be posted here >> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe >> csound" >> >> > > > > -- > > > Andrés > > > Send bugs reports to the Sourceforge bug tracker > https://sourceforge.net/tracker/?group_id=81968&atid=564599 > Discussions of bugs and features can be posted here > To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe > csound" > > > > > Send bugs reports to the Sourceforge bug tracker > https://sourceforge.net/tracker/?group_id=81968&atid=564599 > Discussions of bugs and features can be posted here > To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe > csound" > > Send bugs reports to the Sourceforge bug tracker https://sourceforge.net/tracker/?group_id=81968&atid=564599 Discussions of bugs and features can be posted here To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"