Victor,

Today I tried (on OLPC) to run your two Activities, Waves and synth - from 
their respective directories within csndsugui. I ran both with -d and -v 
flags.

Among the myriad of messages output, two in each run may have some 
significance, and be related to why I'm getting no joy. (Both activities run 
for about two seconds and come back to the command line "normally".)

The messages:
/home/olpc/Activities/csndsugui/Waves.activity/csndsugui.pyc has bad mtime
and several lines later
can't create /home/olpc/Activities/csndsugui/Waves.activity/csndsugui.pyc

(Of course, synth.activity substitutes synth.) BTW, both .pyc's are (or have 
been) created (obviously compiled code with sporadic portions of what looks 
like csndsugui.py scattered throughout).

The installed Python version is 2.5.1.

Any ideas?

Art Hunkins

----- Original Message ----- 
From: "victor" 
To: 
Sent: Thursday, March 05, 2009 6:42 PM
Subject: [Csnd] Re: Re: Re: Python script to embed csd's for OLPC


> This is basically explained in:
>
> http://wiki.laptop.org/go/Activity_tutorial
>
> it's a bundle (a directory with all the required files). Your CSD and
> python script go there. You will need to include csndsugui.py in the
> bundle.
> Look at the examples in
>
> http://git.sugarlabs.org/projects/csndsugui
>
> (you can get them using git clone...)
>
> Victor
>
> ----- Original Message ----- 
> From: "Art Hunkins" 
> To: 
> Sent: Thursday, March 05, 2009 10:28 PM
> Subject: [Csnd] Re: Re: Python script to embed csd's for OLPC
>
>
>> Victor,
>>
>> Where does a Python script have to be located and run from to be able to 
>> find csndsugui? It is installed normally on my OLPC, and a script run 
>> from a thumb drive cannot find it.
>>
>> Art Hunkins
>>
>> ----- Original Message ----- 
>> From: "victor" 
>> To: 
>> Sent: Thursday, March 05, 2009 4:23 PM
>> Subject: [Csnd] Re: Python script to embed csd's for OLPC
>>
>>
>>> See:
>>>
>>> http://wiki.laptop.org/go/Csndsugui
>>>
>>> Victor
>>> ----- Original Message ----- 
>>> From: "Art Hunkins" 
>>> To: 
>>> Sent: Thursday, March 05, 2009 9:12 PM
>>> Subject: [Csnd] Python script to embed csd's for OLPC
>>>
>>>
>>>> Since Python opcodes are absent from OLPCsound, I'd like to try 
>>>> embedding csd's in a Python script. My thought is to have an opening 
>>>> Python "initialization dialog" allowing the performer to set 
>>>> initialization values (accessed via chnget), then embark on real-time 
>>>> performance. No performance-time interaction. The run concludes as 
>>>> usual with Ctrl-C.
>>>>
>>>> Can someone point me to a Csound .py script that does just this? (I'm 
>>>> thinking that such a dialog could well substitute for a "setup GUI", 
>>>> and would not require other software, such as the csndsugui activity, 
>>>> to be downloaded.)
>>>>
>>>> Art Hunkins
>>>>
>>>>
>>>> Send bugs reports to this list.
>>>> To unsubscribe, send email sympa@lists.bath.ac.uk with body 
>>>> "unsubscribe csound"
>>>
>>>
>>>
>>> Send bugs reports to this list.
>>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe 
>>> csound"
>>
>>
>>
>> Send bugs reports to this list.
>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe 
>> csound"
>
>
>
> Send bugs reports to this list.
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe 
> csound" 

Do you have write access to those files/directories?

On Mon, Mar 9, 2009 at 12:18, Art Hunkins  wrote:
> Victor,
>
> Today I tried (on OLPC) to run your two Activities, Waves and synth - from
> their respective directories within csndsugui. I ran both with -d and -v
> flags.
>
> Among the myriad of messages output, two in each run may have some
> significance, and be related to why I'm getting no joy. (Both activities run
> for about two seconds and come back to the command line "normally".)
>
> The messages:
> /home/olpc/Activities/csndsugui/Waves.activity/csndsugui.pyc has bad mtime
> and several lines later
> can't create /home/olpc/Activities/csndsugui/Waves.activity/csndsugui.pyc
>
> (Of course, synth.activity substitutes synth.) BTW, both .pyc's are (or have
> been) created (obviously compiled code with sporadic portions of what looks
> like csndsugui.py scattered throughout).
>
> The installed Python version is 2.5.1.
>
> Any ideas?
>
> Art Hunkins
>
> ----- Original Message ----- From: "victor" 
> To: 
> Sent: Thursday, March 05, 2009 6:42 PM
> Subject: [Csnd] Re: Re: Re: Python script to embed csd's for OLPC
>
>
>> This is basically explained in:
>>
>> http://wiki.laptop.org/go/Activity_tutorial
>>
>> it's a bundle (a directory with all the required files). Your CSD and
>> python script go there. You will need to include csndsugui.py in the
>> bundle.
>> Look at the examples in
>>
>> http://git.sugarlabs.org/projects/csndsugui
>>
>> (you can get them using git clone...)
>>
>> Victor
>>
>> ----- Original Message ----- From: "Art Hunkins" 
>> To: 
>> Sent: Thursday, March 05, 2009 10:28 PM
>> Subject: [Csnd] Re: Re: Python script to embed csd's for OLPC
>>
>>
>>> Victor,
>>>
>>> Where does a Python script have to be located and run from to be able to
>>> find csndsugui? It is installed normally on my OLPC, and a script run from a
>>> thumb drive cannot find it.
>>>
>>> Art Hunkins
>>>
>>> ----- Original Message ----- From: "victor" 
>>> To: 
>>> Sent: Thursday, March 05, 2009 4:23 PM
>>> Subject: [Csnd] Re: Python script to embed csd's for OLPC
>>>
>>>
>>>> See:
>>>>
>>>> http://wiki.laptop.org/go/Csndsugui
>>>>
>>>> Victor
>>>> ----- Original Message ----- From: "Art Hunkins" 
>>>> To: 
>>>> Sent: Thursday, March 05, 2009 9:12 PM
>>>> Subject: [Csnd] Python script to embed csd's for OLPC
>>>>
>>>>
>>>>> Since Python opcodes are absent from OLPCsound, I'd like to try
>>>>> embedding csd's in a Python script. My thought is to have an opening Python
>>>>> "initialization dialog" allowing the performer to set initialization values
>>>>> (accessed via chnget), then embark on real-time performance. No
>>>>> performance-time interaction. The run concludes as usual with Ctrl-C.
>>>>>
>>>>> Can someone point me to a Csound .py script that does just this? (I'm
>>>>> thinking that such a dialog could well substitute for a "setup GUI", and
>>>>> would not require other software, such as the csndsugui activity, to be
>>>>> downloaded.)
>>>>>
>>>>> Art Hunkins
>>>>>
>>>>>
>>>>> Send bugs reports to this list.
>>>>> To unsubscribe, send email sympa@lists.bath.ac.uk with body
>>>>> "unsubscribe csound"
>>>>
>>>>
>>>>
>>>> Send bugs reports to this list.
>>>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>>>> csound"
>>>
>>>
>>>
>>> Send bugs reports to this list.
>>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>>> csound"
>>
>>
>>
>> Send bugs reports to this list.
>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>> csound"
>
>
>
> Send bugs reports to this list.
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
> csound"
>



-- 

	Felipe Sateler