Dear all,

I have become aware of a small issue concerning the rendering of CSDs that
use FLTK opcodes from the terminal on os x. I am unable to move the FLTK GUI
window or even activate it by clicking on it. The faders and other elements
do however respond to mouse click just not the window itself. The only way
to be able to  use the GUI is to close or minimize all the windows in front
of it (funny that by default the FLTK window opens behind all the other
programmes' windows). This problem only happens though when I run csound
from the terminal, e.g. using the csoundGUI front-end there are no problems
of this kind. 

Also when the -d flag is not used and the graphic table display opens, it
behaves in exactly the same way (when runin from the terminal). I cannot
activate the window by clicking on it. 

I understand that this might be an issue with Leopard (?). Or maybe
something wrong with my settings?

Many Thanks in advance
Peiman

-- 
View this message in context: http://www.nabble.com/problem-with-runing-fltk-on-osx-tp15430870p15430870.html
Sent from the Csound - General mailing list archive at Nabble.com.

This is a resource issue, what is happening is that the csound program is
not being 'seen' by Acqua. Normally this is sorted by running

sudo Reza  -i APPL -o /usr/local/bin/csound /usr/local/bin/cs5.r

which is actually done by the installer, so I am not sure why it's not
working.

you can try it anyway.

Victor

At 10:51 12/02/2008, you wrote:

>Dear all,
>
>I have become aware of a small issue concerning the rendering of CSDs that
>use FLTK opcodes from the terminal on os x. I am unable to move the FLTK GUI
>window or even activate it by clicking on it. The faders and other elements
>do however respond to mouse click just not the window itself. The only way
>to be able to  use the GUI is to close or minimize all the windows in front
>of it (funny that by default the FLTK window opens behind all the other
>programmes' windows). This problem only happens though when I run csound
>from the terminal, e.g. using the csoundGUI front-end there are no problems
>of this kind.
>
>Also when the -d flag is not used and the graphic table display opens, it
>behaves in exactly the same way (when runin from the terminal). I cannot
>activate the window by clicking on it.
>
>I understand that this might be an issue with Leopard (?). Or maybe
>something wrong with my settings?
>
>Many Thanks in advance
>Peiman
>
>--
>View this message in context: 
>http://www.nabble.com/problem-with-runing-fltk-on-osx-tp15430870p15430870.html
>Sent from the Csound - General mailing list archive at Nabble.com.
>
>
>
>Send bugs reports to this list.
>To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe 
>csound"

Victor Lazzarini
Music Technology Laboratory
Music Department
National University of Ireland, Maynooth

Thanks Victor,

I just tried running the command. It doesn't make a difference though. It
might be a leopard issue then.

Best
Peiman




Victor.Lazzarini wrote:
> 
> This is a resource issue, what is happening is that the csound program is
> not being 'seen' by Acqua. Normally this is sorted by running
> 
> sudo Reza  -i APPL -o /usr/local/bin/csound /usr/local/bin/cs5.r
> 
> which is actually done by the installer, so I am not sure why it's not
> working.
> 
> you can try it anyway.
> 
> Victor
> 
> At 10:51 12/02/2008, you wrote:
> 
>>Dear all,
>>
>>I have become aware of a small issue concerning the rendering of CSDs that
>>use FLTK opcodes from the terminal on os x. I am unable to move the FLTK
GUI
>>window or even activate it by clicking on it. The faders and other
elements
>>do however respond to mouse click just not the window itself. The only way
>>to be able to  use the GUI is to close or minimize all the windows in
front
>>of it (funny that by default the FLTK window opens behind all the other
>>programmes' windows). This problem only happens though when I run csound
>>from the terminal, e.g. using the csoundGUI front-end there are no
problems
>>of this kind.
>>
>>Also when the -d flag is not used and the graphic table display opens, it
>>behaves in exactly the same way (when runin from the terminal). I cannot
>>activate the window by clicking on it.
>>
>>I understand that this might be an issue with Leopard (?). Or maybe
>>something wrong with my settings?
>>
>>Many Thanks in advance
>>Peiman
>>
>>--
>>View this message in context: 
>>http://www.nabble.com/problem-with-runing-fltk-on-osx-tp15430870p15430870.html
>>Sent from the Csound - General mailing list archive at Nabble.com.
>>
>>
>>
>>Send bugs reports to this list.
>>To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe 
>>csound"
> 
> Victor Lazzarini
> Music Technology Laboratory
> Music Department
> National University of Ireland, Maynooth
> 
> 
> 
> Send bugs reports to this list.
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
> csound"
> 
> 

-- 
View this message in context: http://www.nabble.com/problem-with-runing-fltk-on-osx-tp15430870p15432081.html
Sent from the Csound - General mailing list archive at Nabble.com.

Ah, it's 10.5 then. I will need to upgrade one of our machines.

Victor

At 12:17 12/02/2008, you wrote:

>Thanks Victor,
>
>I just tried running the command. It doesn't make a difference though. It
>might be a leopard issue then.
>
>Best
>Peiman
>
>
>
>
>Victor.Lazzarini wrote:
> >
> > This is a resource issue, what is happening is that the csound program is
> > not being 'seen' by Acqua. Normally this is sorted by running
> >
> > sudo Reza  -i APPL -o /usr/local/bin/csound /usr/local/bin/cs5.r
> >
> > which is actually done by the installer, so I am not sure why it's not
> > working.
> >
> > you can try it anyway.
> >
> > Victor
> >
> > At 10:51 12/02/2008, you wrote:
> >
> >>Dear all,
> >>
> >>I have become aware of a small issue concerning the rendering of CSDs that
> >>use FLTK opcodes from the terminal on os x. I am unable to move the FLTK
>GUI
> >>window or even activate it by clicking on it. The faders and other
>elements
> >>do however respond to mouse click just not the window itself. The only way
> >>to be able to  use the GUI is to close or minimize all the windows in
>front
> >>of it (funny that by default the FLTK window opens behind all the other
> >>programmes' windows). This problem only happens though when I run csound
> >>from the terminal, e.g. using the csoundGUI front-end there are no
>problems
> >>of this kind.
> >>
> >>Also when the -d flag is not used and the graphic table display opens, it
> >>behaves in exactly the same way (when runin from the terminal). I cannot
> >>activate the window by clicking on it.
> >>
> >>I understand that this might be an issue with Leopard (?). Or maybe
> >>something wrong with my settings?
> >>
> >>Many Thanks in advance
> >>Peiman
> >>
> >>--
> >>View this message in context:
> >>http://www.nabble.com/problem-with-runing-fltk-on-osx-tp15430870p1543087 
> 0.html
> >>Sent from the Csound - General mailing list archive at Nabble.com.
> >>
> >>
> >>
> >>Send bugs reports to this list.
> >>To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
> >>csound"
> >
> > Victor Lazzarini
> > Music Technology Laboratory
> > Music Department
> > National University of Ireland, Maynooth
> >
> >
> >
> > Send bugs reports to this list.
> > To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
> > csound"
> >
> >
>
>--
>View this message in context: 
>http://www.nabble.com/problem-with-runing-fltk-on-osx-tp15430870p15432081.html
>Sent from the Csound - General mailing list archive at Nabble.com.
>
>
>
>Send bugs reports to this list.
>To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe 
>csound"

Victor Lazzarini
Music Technology Laboratory
Music Department
National University of Ireland, Maynooth