Hector Centeno wrote:
> Aah! Finally I found the solution to the linking problems! It's in this thread:
>
> http://permalink.gmane.org/gmane.comp.audio.csound.devel/12132
>
> The problem is the SONAME given to libcsnd and it appeared in Csound
> 5.07 after a patch by Felipe Sateler. I just followed his solution and
> now I can import csnd in python!
>
> Cheeers!
>
> Hector
>
>
>   
I tried this solution and it works here too.

But, when compiling after having cleaned up (with scons -c) I had to 
invoke scons twice, because the first time it stopped with:

scons: *** Source `libcsound.so' not found, needed by target 
`_csnd.so'.  Stop.
scons: building terminated because of errors.

It seems that there's some problem in the order these two are built. I'm 
no expert with scons.

Is this a problem introduced by this fix?

Anyway, it would be good to uninstall everything and clean the build 
every now and then to check for this kind of problems.

Cheers,

-c.

>
>
>
> On Mon, Feb 25, 2008 at 2:54 PM, Hector Centeno  wrote:
>   
>> Thank your Cesare, it helps! Was that ldd on _csnd.so inside the
>>  Python site-packages directory?
>>
>>  Would you mind telling me what do you get if in a terminal you enter
>>  "python" and then "import csnd"?
>>
>>  Did you build csound from cvs?
>>
>>  Thanks!
>>
>>  Hector
>>
>>
>>
>>
>>
>>  On Mon, Feb 25, 2008 at 2:19 PM, Cesare Marilungo
>>   wrote:
>>  > If it can be of some help, here's mine (but I'm no Slackware):
>>  >
>>  >         linux-gate.so.1 =>  (0xffffe000)
>>  >         libpython2.5.so.1.0 => /usr/lib/libpython2.5.so.1.0 (0xb7dc3000)
>>  >         libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb7cdf000)
>>  >         libutil.so.1 => /lib/libutil.so.1 (0xb7cdb000)
>>  >         libcsound.so.5.1 => /usr/local/lib/libcsound.so.5.1 (0xb7c2a000)
>>  >         libsndfile.so.1 => /usr/local/lib/libsndfile.so.1 (0xb7bcf000)
>>  >         libportaudio.so.2 => /usr/local/lib/libportaudio.so.2 (0xb7ba8000)
>>  >         libfltk.so.1.1 => /usr/local/lib/libfltk.so.1.1 (0xb7b2d000)
>>  >         libasound.so.2 => /usr/lib/libasound.so.2 (0xb7a6c000)
>>  >         libjack.so.0 => /usr/local/lib/libjack.so.0 (0xb7a52000)
>>  >         liblo.so.0 => /usr/local/lib/liblo.so.0 (0xb7a48000)
>>  >         libdl.so.2 => /lib/libdl.so.2 (0xb7a43000)
>>  >         libpthread.so.0 => /lib/libpthread.so.0 (0xb7a2c000)
>>  >         libm.so.6 => /lib/libm.so.6 (0xb7a05000)
>>  >         libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb79fa000)
>>  >         libc.so.6 => /lib/libc.so.6 (0xb78b8000)
>>  >
>>  >         /lib/ld-linux.so.2 (0x80000000)
>>  >         libFLAC.so.7 => /usr/lib/libFLAC.so.7 (0xb7876000)
>>  >         librt.so.1 => /lib/librt.so.1 (0xb786e000)
>>  >         libXext.so.6 => /usr/lib/libXext.so.6 (0xb7860000)
>>  >         libX11.so.6 => /usr/lib/libX11.so.6 (0xb7778000)
>>  >         libXau.so.6 => /usr/lib/libXau.so.6 (0xb7775000)
>>  >         libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xb7772000)
>>  >         libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb775b000)
>>  >         libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb7756000)
>>  >
>>  >  Cheers,
>>  >
>>  >  -c.
>>  >
>>  >
>>  >
>>  >  Hector Centeno wrote:
>>  >  > Hello Victor,
>>  >  >
>>  >  > Could you please send me the output of  "ldd _csound.so" of your build?
>>  >  >
>>  >  > Thanks,
>>  >  >
>>  >  > Hector
>>  >  >
>>  >  >
>>  >  >
>>  >  > On Mon, Feb 25, 2008 at 9:39 AM, Victor Lazzarini
>>  >  >  wrote:
>>  >  >
>>  >  >> Just checked here (Fedora 7). The file _csnd.so is linked to
>>  >  >>  libcsnd.so correctly. I am not sure why yours is not. I just
>>  >  >>  built my system with scons and then checked the _csnd.so
>>  >  >>  file in my build directory.
>>  >  >>
>>  >  >>  Perhaps the one in site-packages is an old version of _csnd.so
>>  >  >>  which did not need the link. Did you check if the file is up-to-date?
>>  >  >>
>>  >  >>
>>  >  >>
>>  >  >>  At 14:19 25/02/2008, you wrote:
>>  >  >>  >Thanks Victor for your response.
>>  >  >>  >
>>  >  >>  >Sorry, I forgot to mention I'm running Fedora 8 Linux (plus CCRMA). I
>>  >  >>  >built with /usr prefix intentionally to see if that would help with
>>  >  >>  >the linking. Before I did with the default /usr/local. ldd shows it is
>>  >  >>  >linked to libcsound64.so but not to libcsnd.so.5.1 which is the one
>>  >  >>  >that contains the symbol
>>  >  >>  >
>>  >  >>  >$ nm /usr/lib/libcsnd.so.5.1 | grep _ZN17CsoundUtilityList5CountEv
>>  >  >>  >0001bae0 T _ZN17CsoundUtilityList5CountEv
>>  >  >>  >
>>  >  >>  >while:
>>  >  >>  >
>>  >  >>  >$ nm /usr/lib/libcsound64.so.5.1 | grep _ZN17CsoundUtilityList5CountEv
>>  >  >>  >[nothing]
>>  >  >>  >
>>  >  >>  >
>>  >  >>  >Am I understanding it wrong?
>>  >  >>  >
>>  >  >>  >
>>  >  >>  >Thanks again,
>>  >  >>  >
>>  >  >>  >
>>  >  >>  >Hector
>>  >  >>  >
>>  >  >>  >
>>  >  >>  >
>>  >  >>  >
>>  >  >>  >
>>  >  >>  >
>>  >  >>  >On Mon, Feb 25, 2008 at 3:39 AM, victor  wrote:
>>  >  >>  > > But it's linked alright, is it not?
>>  >  >>  > >
>>  >  >>  > >
>>  >  >>  > >  libcsound64.so.5.1 => /usr/lib/libcsound64.so.5.1 (0xb7b41000)
>>  >  >>  > >
>>  >  >>  > >  I am surprised to see libcsound in /usr/lib. I would have
>>  >  >>  > >  thought you had it in /usr/local/lib from a custom build.
>>  >  >>  > >
>>  >  >>  > >  Are you sure you don't have more than two versions knocking
>>  >  >>  > >  around in your system?
>>  >  >>  > >
>>  >  >>  > >  Victor
>>  >  >>  > >
>>  >  >>  > >
>>  >  >>  > >  ----- Original Message -----
>>  >  >>  > >  From: "Hector Centeno" 
>>  >  >>  > >  To: 
>>  >  >>  > >  Sent: Monday, February 25, 2008 7:12 AM
>>  >  >>  > >  Subject: [Csnd] please help with csound and python
>>  >  >>  > >
>>  >  >>  > >
>>  >  >>  > >
>>  >  >>  > >
>>  >  >>  > > > Hi,
>>  >  >>  > >  >
>>  >  >>  > >  > Once more I'm dealing with an unresolved problem I've been
>>  >  >>  > >  > experiencing since some time ago when building csound from CVS. I keep
>>  >  >>  > >  > getting undefined symbols errors when Python tries to import csnd. Now
>>  >  >>  > >  > i got it trying to run PartikkelExplorer:
>>  >  >>  > >  >
>>  >  >>  > >  > $ python '/home/hector/Desktop/PartikkelExplorer/PartikkelExplorer.py'
>>  >  >>  > >  > Traceback (most recent call last):
>>  >  >>  > >  >  File "/home/hector/Desktop/PartikkelExplorer/PartikkelExplorer.py",
>>  >  >>  > >  > line 19, in 
>>  >  >>  > >  >    from csnd import *
>>  >  >>  > >  >  File "/usr/lib/python2.5/site-packages/csnd.py", line 7, in 
>>  >  >>  > >  >    import _csnd
>>  >  >>  > >  > ImportError: /usr/lib/python2.5/site-packages/_csnd.so: undefined
>>  >  >>  > >  > symbol: _ZN17CsoundUtilityList5CountEv
>>  >  >>  > >  >
>>  >  >>  > >  > I'm building csound using doubles, dynamic libraries and interfaces
>>  >  >>  > >  > and installing everything to /usr. The previous time I came to the
>>  >  >>  > >  > list looking for help about this Michael Gogins tried very hard to
>>  >  >>  > >  > help me but I just ran out of ideas since I'm not an expert in file
>>  >  >>  > >  > linking or in C compilation in general. I made sure there is no
>>  >  >>  > >  > previous installation of any older Csound file. I did a ldconfig, I
>>  >  >>  > >  > did set LD_CONFIG_PATH and PYTHONPATH without success. Is there
>>  >  >>  > >  > something in the building process that is failing to link csound.so
>>  >  >>  > >  > with libcsnd? Some more information:
>>  >  >>  > >  >
>>  >  >>  > >  > $ nm /usr/lib/libcsnd.so.5.1 | grep _ZN17CsoundUtilityList5CountEv
>>  >  >>  > >  > 0001bae0 T _ZN17CsoundUtilityList5CountEv
>>  >  >>  > >  >
>>  >  >>  > >  > $ nm /usr/lib/python2.5/site-packages/_csnd.so | grep
>>  >  >>  > >  > _ZN17CsoundUtilityList5CountEv
>>  >  >>  > >  >         U _ZN17CsoundUtilityList5CountEv
>>  >  >>  > >  >
>>  >  >>  > >  > ]$ ldd /usr/lib/python2.5/site-packages/_csnd.so
>>  >  >>  > >  >        linux-gate.so.1 =>  (0xb7f07000)
>>  >  >>  > >  >        libpython2.5.so.1.0 => /usr/lib/libpython2.5.so.1.0 (0xb7cf1000)
>>  >  >>  > >  >        libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb7c06000)
>>  >  >>  > >  >        libutil.so.1 => /lib/libutil.so.1 (0xb7c02000)
>>  >  >>  > >  >        libcsound64.so.5.1 => /usr/lib/libcsound64.so.5.1 (0xb7b41000)
>>  >  >>  > >  >        libsndfile.so.1 => /usr/lib/libsndfile.so.1 (0xb7ae1000)
>>  >  >>  > >  >        libfltk.so.1.1 => /usr/lib/libfltk.so.1.1 (0xb7a37000)
>>  >  >>  > >  >        libasound.so.2 => /lib/libasound.so.2 (0xb7958000)
>>  >  >>  > >  >        libjack.so.0 => /usr/lib/libjack.so.0 (0xb793d000)
>>  >  >>  > >  >        liblo.so.0 => /usr/lib/liblo.so.0 (0xb7932000)
>>  >  >>  > >  >        libdl.so.2 => /lib/libdl.so.2 (0xb792d000)
>>  >  >>  > >  >        libpthread.so.0 => /lib/libpthread.so.0 (0xb7913000)
>>  >  >>  > >  >        libm.so.6 => /lib/libm.so.6 (0xb78ea000)
>>  >  >>  > >  >        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb78de000)
>>  >  >>  > >  >        libc.so.6 => /lib/libc.so.6 (0xb7785000)
>>  >  >>  > >  >        /lib/ld-linux.so.2 (0x80000000)
>>  >  >>  > >  >        libXft.so.2 => /usr/lib/libXft.so.2 (0xb7772000)
>>  >  >>  > >  >        libXinerama.so.1 => /usr/lib/libXinerama.so.1 (0xb776e000)
>>  >  >>  > >  >        libXext.so.6 => /usr/lib/libXext.so.6 (0xb775e000)
>>  >  >>  > >  >        libX11.so.6 => /usr/lib/libX11.so.6 (0xb7662000)
>>  >  >>  > >  >        librt.so.1 => /lib/librt.so.1 (0xb7659000)
>>  >  >>  > >  >        libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0xb762a000)
>>  >  >>  > >  >        libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb759d000)
>>  >  >>  > >  >        libXrender.so.1 => /usr/lib/libXrender.so.1 (0xb7594000)
>>  >  >>  > >  >        libXau.so.6 => /usr/lib/libXau.so.6 (0xb7591000)
>>  >  >>  > >  >        libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xb758f000)
>>  >  >>  > >  >        libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb7573000)
>>  >  >>  > >  >        libexpat.so.1 => /lib/libexpat.so.1 (0xb7551000)
>>  >  >>  > >  >        libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb754b000)
>>  >  >>  > >  >
>>  >  >>  > >  > Is there a way of manually creating this link after building with
>>  >  >>  > >  > scons is finished? What would be the command for doing so? Using the
>>  >  >>  > >  > Csound packages from the Fedora repository I don't get this kind of
>>  >  >>  > >  > errors.
>>  >  >>  > >  >
>>  >  >>  > >  > I'll appreciate a lot any help since this problem has been an obstacle
>>  >  >>  > >  > for me to start learning to program Csound GUIs using Python.
>>  >  >>  > >  >
>>  >  >>  > >  >
>>  >  >>  > >  >
>>  >  >>  > >  > Hector
>>  >  >>  > >  >
>>  >  >>  > >  >
>>  >  >>  > >
>>  >  >>  > >
>>  >  >>  > > > Send bugs reports to this list.
>>  >  >>  > >  > To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>>  >  >>  > >  > csound"
>>  >  >>  > >
>>  >  >>  > >
>>  >  >>  > >
>>  >  >>  > >  Send bugs reports to this list.
>>  >  >>  > >  To unsubscribe, send email sympa@lists.bath.ac.uk with body
>>  >  >>  > "unsubscribe csound"
>>  >  >>  > >
>>  >  >>  >
>>  >  >>  >
>>  >  >>  >Send bugs reports to this list.
>>  >  >>  >To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>>  >  >>  >csound"
>>  >  >>
>>  >  >>  Victor Lazzarini
>>  >  >>  Music Technology Laboratory
>>  >  >>  Music Department
>>  >  >>  National University of Ireland, Maynooth
>>  >  >>
>>  >  >>
>>  >  >>
>>  >  >>
>>  >  >>
>>  >  >>  Send bugs reports to this list.
>>  >  >>  To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"
>>  >  >>
>>  >  >>
>>  >  >
>>  >  >
>>  >  > Send bugs reports to this list.
>>  >  > To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"
>>  >  >
>>  >  >
>>  >  >
>>  >
>>  >
>>  >  --
>>  >  www.cesaremarilungo.com
>>  >
>>  >
>>  >
>>  >
>>  >
>>  >  Send bugs reports to this list.
>>  >  To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"
>>  >
>>
>>     
>
>
> Send bugs reports to this list.
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"
>
>
>   


-- 
www.cesaremarilungo.com