I really wish I could make it to the Linux Audio Conference, but travel 
is way out of my budget for a while. I did see on the list of 
presentations, though, a talk about something called Cabbage, which is a 
GUI framework for Csound. I did a Google search hunting around for more 
information, and other than the LAC page itself, only turned up a couple 
of message board posts. I was wondering if there might be any more 
information out there on this, and that maybe Google failed me (it's 
happened before).

Thank you for the help!

-- Darren Landrum

I wished I could go too, it is looking really good with John ffitch, Miller 
Puckette, Julius Smith,
Johannes Zmoelnig and others. But I can't take the time off. I would like to
encourage anyone that can to go. It's always great fun.

And Cabbage has been developed by Rory, who is on this list (or is he away?).

Victor


At 01:51 15/02/2008, you wrote:
>I really wish I could make it to the Linux Audio Conference, but travel is 
>way out of my budget for a while. I did see on the list of presentations, 
>though, a talk about something called Cabbage, which is a GUI framework 
>for Csound. I did a Google search hunting around for more information, and 
>other than the LAC page itself, only turned up a couple of message board 
>posts. I was wondering if there might be any more information out there on 
>this, and that maybe Google failed me (it's happened before).
>
>Thank you for the help!
>
>-- Darren Landrum
>
>
>Send bugs reports to this list.
>To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe 
>csound"

Victor Lazzarini
Music Technology Laboratory
Music Department
National University of Ireland, Maynooth

I'm still here but I'm bogged under with work stuff....


Victor Lazzarini wrote:
> I wished I could go too, it is looking really good with John ffitch, 
> Miller Puckette, Julius Smith,
> Johannes Zmoelnig and others. But I can't take the time off. I would 
> like to
> encourage anyone that can to go. It's always great fun.
> 
> And Cabbage has been developed by Rory, who is on this list (or is he 
> away?).
> 
> Victor
> 
> 
> At 01:51 15/02/2008, you wrote:
>> I really wish I could make it to the Linux Audio Conference, but 
>> travel is way out of my budget for a while. I did see on the list of 
>> presentations, though, a talk about something called Cabbage, which is 
>> a GUI framework for Csound. I did a Google search hunting around for 
>> more information, and other than the LAC page itself, only turned up a 
>> couple of message board posts. I was wondering if there might be any 
>> more information out there on this, and that maybe Google failed me 
>> (it's happened before).
>>
>> Thank you for the help!
>>
>> -- Darren Landrum
>>
>>
>> Send bugs reports to this list.
>> To unsubscribe, send email sympa@lists.bath.ac.uk with body 
>> "unsubscribe csound"
> 
> Victor Lazzarini
> Music Technology Laboratory
> Music Department
> National University of Ireland, Maynooth
> 
> 
> 
> Send bugs reports to this list.
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe 
> csound"
> 

Cabbage is a new framework for the development of cross-platform 
standalone Csound applications. It provides Csound users with the tools 
to develop nice front-ends for their instruments without having to be 
experienced programmers. It's still under development but it's almost 
ready for the first release. I hope to have it out there before the LAC.

Rory.




Darren Landrum wrote:
> I really wish I could make it to the Linux Audio Conference, but travel 
> is way out of my budget for a while. I did see on the list of 
> presentations, though, a talk about something called Cabbage, which is a 
> GUI framework for Csound. I did a Google search hunting around for more 
> information, and other than the LAC page itself, only turned up a couple 
> of message board posts. I was wondering if there might be any more 
> information out there on this, and that maybe Google failed me (it's 
> happened before).
> 
> Thank you for the help!
> 
> -- Darren Landrum
> 
> 
> Send bugs reports to this list.
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe 
> csound"
> 

Rory Walsh wrote:
>   it's almost
> ready for the first release. I hope to have it out there before the LAC.

That sounds great. I'm looking forward to trying it out!

-- 
peace, love & harmony
Atte

http://atte.dk       | http://myspace.com/attejensen
http://anagrammer.dk | http://modlys.dk

ok i still need help understanding the syntax
i am trying to make some thing simple like bit crusher like

ain inch 2

agate 	mpulse	1, "kdecfct"

asig1  	samphold	ain1, agate
asig2	        samphold  ain2, agate

outs asig1, asig2

error  : (

--
View this message in context: http://csound.1045644.n5.nabble.com/A-question-about-Cabbage-tp1111292p4965868.html
Sent from the Csound - General mailing list archive at Nabble.com.


Send bugs reports to the Sourceforge bug tracker
            https://sourceforge.net/tracker/?group_id=81968&atid=564599
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"

Sorry, I might be off, as I did not read all of this thread,
but it looks like you get an error because ain1 and ain2 are not defined.
You only have one input, so you should be ok with one samphold, using
ain as input:

ain inch 2
agate   mpulse  1, "kdecfct"
asig1   samphold        ain, agate
outs asig1, asig1

This will give you a "downsampler" not a bit crusher.

Sorry if I misunderstood the problem(?)
best
Oeyvind


2011/11/5 Shawn56 :
> ok i still need help understanding the syntax
> i am trying to make some thing simple like bit crusher like
>
> ain inch 2
>
> agate   mpulse  1, "kdecfct"
>
> asig1   samphold        ain1, agate
> asig2           samphold  ain2, agate
>
> outs asig1, asig2
>
> error  : (
>
> --
> View this message in context: http://csound.1045644.n5.nabble.com/A-question-about-Cabbage-tp1111292p4965868.html
> Sent from the Csound - General mailing list archive at Nabble.com.
>
>
> Send bugs reports to the Sourceforge bug tracker
>            https://sourceforge.net/tracker/?group_id=81968&atid=564599
> Discussions of bugs and features can be posted here
> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"
>
>



-- 

Oeyvind Brandtsegg
Professor of Music Technology
NTNU
7491 Trondheim
Norway


Send bugs reports to the Sourceforge bug tracker
            https://sourceforge.net/tracker/?group_id=81968&atid=564599
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"

Sorry for the delay in replying Shawn. Is it working ok now? FWIW you
can simplify the code below to:

a1,a2 ins
outs a1, a2

Rory.


On 6 November 2011 02:12, Shawn Richard  wrote:
> i was just tiring to make an example for my self i got it now i was just a
> bit confused
> i know this looks unnecessary but i understand it now thank you for your
> help
> a1,a2 ins
> aR = a1
> aL = a2
> asig1 = aR
> asig2 = aL
> outs asig1, asig2
>
> On Sat, Nov 5, 2011 at 4:19 PM, Oeyvind Brandtsegg
>  wrote:
>>
>> Sorry, I might be off, as I did not read all of this thread,
>> but it looks like you get an error because ain1 and ain2 are not defined.
>> You only have one input, so you should be ok with one samphold, using
>> ain as input:
>>
>> ain inch 2
>> agate   mpulse  1, "kdecfct"
>> asig1   samphold        ain, agate
>> outs asig1, asig1
>>
>> This will give you a "downsampler" not a bit crusher.
>>
>> Sorry if I misunderstood the problem(?)
>> best
>> Oeyvind
>>
>>
>> 2011/11/5 Shawn56 :
>> > ok i still need help understanding the syntax
>> > i am trying to make some thing simple like bit crusher like
>> >
>> > ain inch 2
>> >
>> > agate   mpulse  1, "kdecfct"
>> >
>> > asig1   samphold        ain1, agate
>> > asig2           samphold  ain2, agate
>> >
>> > outs asig1, asig2
>> >
>> > error  : (
>> >
>> > --
>> > View this message in context:
>> > http://csound.1045644.n5.nabble.com/A-question-about-Cabbage-tp1111292p4965868.html
>> > Sent from the Csound - General mailing list archive at Nabble.com.
>> >
>> >
>> > Send bugs reports to the Sourceforge bug tracker
>> >            https://sourceforge.net/tracker/?group_id=81968&atid=564599
>> > Discussions of bugs and features can be posted here
>> > To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>> > csound"
>> >
>> >
>>
>>
>>
>> --
>>
>> Oeyvind Brandtsegg
>> Professor of Music Technology
>> NTNU
>> 7491 Trondheim
>> Norway
>>
>>
>> Send bugs reports to the Sourceforge bug tracker
>>            https://sourceforge.net/tracker/?group_id=81968&atid=564599
>> Discussions of bugs and features can be posted here
>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>> csound"
>>
>
>


Send bugs reports to the Sourceforge bug tracker
            https://sourceforge.net/tracker/?group_id=81968&atid=564599
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"

http://code.google.com/p/cabbage/wiki/ReferenceManual

I'm in the process of updating this.

On 15 November 2011 22:59, Shawn Richard  wrote:
> how would i edit the gui of my vst
>
> On Sun, Nov 6, 2011 at 11:12 AM, Shawn Richard  wrote:
>>
>> ok thanks man
>>
>> On Sun, Nov 6, 2011 at 6:14 AM, Rory Walsh  wrote:
>>>
>>> Sorry for the delay in replying Shawn. Is it working ok now? FWIW you
>>> can simplify the code below to:
>>>
>>> a1,a2 ins
>>> outs a1, a2
>>>
>>> Rory.
>>>
>>>
>>> On 6 November 2011 02:12, Shawn Richard  wrote:
>>> > i was just tiring to make an example for my self i got it now i was
>>> > just a
>>> > bit confused
>>> > i know this looks unnecessary but i understand it now thank you for
>>> > your
>>> > help
>>> > a1,a2 ins
>>> > aR = a1
>>> > aL = a2
>>> > asig1 = aR
>>> > asig2 = aL
>>> > outs asig1, asig2
>>> >
>>> > On Sat, Nov 5, 2011 at 4:19 PM, Oeyvind Brandtsegg
>>> >  wrote:
>>> >>
>>> >> Sorry, I might be off, as I did not read all of this thread,
>>> >> but it looks like you get an error because ain1 and ain2 are not
>>> >> defined.
>>> >> You only have one input, so you should be ok with one samphold, using
>>> >> ain as input:
>>> >>
>>> >> ain inch 2
>>> >> agate   mpulse  1, "kdecfct"
>>> >> asig1   samphold        ain, agate
>>> >> outs asig1, asig1
>>> >>
>>> >> This will give you a "downsampler" not a bit crusher.
>>> >>
>>> >> Sorry if I misunderstood the problem(?)
>>> >> best
>>> >> Oeyvind
>>> >>
>>> >>
>>> >> 2011/11/5 Shawn56 :
>>> >> > ok i still need help understanding the syntax
>>> >> > i am trying to make some thing simple like bit crusher like
>>> >> >
>>> >> > ain inch 2
>>> >> >
>>> >> > agate   mpulse  1, "kdecfct"
>>> >> >
>>> >> > asig1   samphold        ain1, agate
>>> >> > asig2           samphold  ain2, agate
>>> >> >
>>> >> > outs asig1, asig2
>>> >> >
>>> >> > error  : (
>>> >> >
>>> >> > --
>>> >> > View this message in context:
>>> >> >
>>> >> > http://csound.1045644.n5.nabble.com/A-question-about-Cabbage-tp1111292p4965868.html
>>> >> > Sent from the Csound - General mailing list archive at Nabble.com.
>>> >> >
>>> >> >
>>> >> > Send bugs reports to the Sourceforge bug tracker
>>> >> >
>>> >> >  https://sourceforge.net/tracker/?group_id=81968&atid=564599
>>> >> > Discussions of bugs and features can be posted here
>>> >> > To unsubscribe, send email sympa@lists.bath.ac.uk with body
>>> >> > "unsubscribe
>>> >> > csound"
>>> >> >
>>> >> >
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >>
>>> >> Oeyvind Brandtsegg
>>> >> Professor of Music Technology
>>> >> NTNU
>>> >> 7491 Trondheim
>>> >> Norway
>>> >>
>>> >>
>>> >> Send bugs reports to the Sourceforge bug tracker
>>> >>            https://sourceforge.net/tracker/?group_id=81968&atid=564599
>>> >> Discussions of bugs and features can be posted here
>>> >> To unsubscribe, send email sympa@lists.bath.ac.uk with body
>>> >> "unsubscribe
>>> >> csound"
>>> >>
>>> >
>>> >
>>>
>>>
>>> Send bugs reports to the Sourceforge bug tracker
>>>            https://sourceforge.net/tracker/?group_id=81968&atid=564599
>>> Discussions of bugs and features can be posted here
>>> To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe
>>> csound"
>>>
>>
>
>


Send bugs reports to the Sourceforge bug tracker
            https://sourceforge.net/tracker/?group_id=81968&atid=564599
Discussions of bugs and features can be posted here
To unsubscribe, send email sympa@lists.bath.ac.uk with body "unsubscribe csound"